RegViz: Visualize HILO Bitfield

NXP Semiconductors /LPC43xx /EVENTROUTER /HILO

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as HILO

USB0_L=DETECT_LOW_LEVEL, ETH_L=DETECT_LOW_LEVEL, RESET_L=DETECT_LOW_LEVEL_IF, BOD_L=DETECT_LOW_LEVEL, RTC_L=DETECT_LOW_LEVEL, WAKEUP3_L=DETECT_LOW_LEVEL, WAKEUP0_L=DETECT_LOW_LEVEL, USB1_L=DETECT_LOW_LEVEL, QEI_L=DETECT_LOW_LEVEL, BODRESET_L=DETECT_LOW_LEVEL_IF, ATIMER_L=DETECT_LOW_LEVEL, TIM14_L=DETECT_LOW_LEVEL, TIM6_L=DETECT_LOW_LEVEL, CAN_L=DETECT_LOW_LEVEL, SDMMC_L=DETECT_LOW_LEVEL, WAKEUP2_L=DETECT_LOW_LEVEL, WAKEUP1_L=DETECT_LOW_LEVEL, WWDT_L=DETECT_LOW_LEVEL, TIM2_L=DETECT_LOW_LEVEL, DPDRESET_L=DETECT_LOW_LEVEL_IF

Description

Level configuration register

Fields

WAKEUP0_L	Level detect mode for WAKEUP0 event. 0 (DETECT_LOW_LEVEL): Detect LOW level on the WAKEUP0 pin if bit 0 in the EDGE register is 0. Detect falling edge if bit 0 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level on the WAKEUP0 pin if bit 0 in the EDGE register is 0. Detect rising edge if bit 0 in the EDGE register is 1.
WAKEUP1_L	Level detect mode for WAKEUP1 event. The corresponding bit in the EDGE register must be 0. 0 (DETECT_LOW_LEVEL): Detect LOW level on the WAKEUP1 pin if bit 1 in the EDGE register is 0. 1 (DETECT_HIGH_LEVEL): Detect HIGH level on the WAKEUP1 pin if bit 1 in the EDGE register is 0. Detect rising edge if bit 1 in the EDGE register is 1.
WAKEUP2_L	Level detect mode for WAKEUP2 event. 0 (DETECT_LOW_LEVEL): Detect LOW level on the WAKEUP2 pin if bit 2 in the EDGE register is 0. Detect falling edge if bit 2 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level on the WAKEUP2 pin if bit 2 in the EDGE register is 0. Detect rising edge if bit 2 in the EDGE register is 1.
WAKEUP3_L	Level detect mode for WAKEUP3 event. 0 (DETECT_LOW_LEVEL): Detect LOW level on the WAKEUP3 pin if bit 3 in the EDGE register is 0. Detect falling edge if bit 3 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level on the WAKEUP3 pin if bit 3 in the EDGE register is 0. Detect rising edge if bit 3 in the EDGE register is 1.
ATIMER_L	Level detect mode for alarm timer event. 0 (DETECT_LOW_LEVEL): Detect LOW level of the alarm timer interrupt if bit 4 in the EDGE register is 0. Detect falling edge if bit 4 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the alarm timer interrupt if bit 4 in the EDGE register is 0. Detect rising edge if bit 4 in the EDGE register is 1.
RTC_L	Level detect mode for RTC event. 0 (DETECT_LOW_LEVEL): Detect LOW level of the RTC interrupt if bit 5 in the EDGE register is 0. Detect falling edge if bit 5 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the RTC interrupt if bit 5 in the EDGE register is 0. Detect rising edge if bit 5 in the EDGE register is 1.
BOD_L	Level detect mode for BOD event. 0 (DETECT_LOW_LEVEL): Detect LOW level of the BOD interrupt if bit 6 in the EDGE register is 0. Detect falling edge if bit 6 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the BOD interrupt if bit 6 in the EDGE register is 0. Detect rising edge if bit 6 in the EDGE register is 1.
WWDT_L	Level detect mode for WWDT event. 0 (DETECT_LOW_LEVEL): Detect LOW level of the WWDT interrupt if bit 7 in the EDGE register is 0. Detect falling edge if bit 7 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the WWDT interrupt if bit 7 in the EDGE register is 0. Detect rising edge if bit 7 in the EDGE register is 1.
ETH_L	Level detect mode for Ethernet event 0 (DETECT_LOW_LEVEL): Detect LOW level of the Ethernet interrupt if bit 8 in the EDGE register is 0. Detect falling edge if bit 8 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the Ethernet interrupt if bit 8 in the EDGE register is 0. Detect rising edge if bit 8 in the EDGE register is 1.
USB0_L	Level detect mode for USB0 event 0 (DETECT_LOW_LEVEL): Detect LOW level of the USB0 interrupt if bit 9 in the EDGE register is 0. Detect falling edge if bit 9 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the USB0 interrupt if bit 9 in the EDGE register is 0. Detect rising edge if bit 9 in the EDGE register is 1.
USB1_L	Level detect mode for USB1 event 0 (DETECT_LOW_LEVEL): Detect LOW level of the USB1 interrupt if bit 10 in the EDGE register is 0. Detect falling edge if bit 10 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the USB1 interrupt if bit 10 in the EDGE register is 0. Detect rising edge if bit 10 in the EDGE register is 1.
SDMMC_L	Level detect mode for SD/MMC event 0 (DETECT_LOW_LEVEL): Detect LOW level of the SD/MMC interrupt if bit 11 in the EDGE register is 0. Detect falling edge if bit 11 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the SD/MMC interrupt if bit 11 in the EDGE register is 0. Detect rising edge if bit 11 in the EDGE register is 1.
CAN_L	Level detect mode for C_CAN event. 0 (DETECT_LOW_LEVEL): Detect LOW level of the combined C_CAN interrupt if bit 12 in the EDGE register is 0. Detect falling edge if bit 12 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the combined C_CAN interrupt if bit 12 in the EDGE register is 0. Detect rising edge if bit 12 in the EDGE register is 1.
TIM2_L	Level detect mode for combined timer output 2 event. 0 (DETECT_LOW_LEVEL): Detect LOW level GIMA output 25 if bit 13 in the EDGE register is 0. Detect falling edge if bit 13 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level GIMA output 25 if bit 13 in the EDGE register is 0. Detect rising edge if bit 13 in the EDGE register is 1.
TIM6_L	Level detect mode for combined timer output 6 event. 0 (DETECT_LOW_LEVEL): Detect LOW level of GIMA output 26 if bit 14 in the EDGE register is 0. Detect falling edge if bit 14 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of GIMA output 26 if bit 14 in the EDGE register is 0. Detect rising edge if bit 14 in the EDGE register is 1.
QEI_L	Level detect mode for QEI event. 0 (DETECT_LOW_LEVEL): Detect LOW level of the QEI interrupt if bit 15 in the EDGE register is 0. Detect falling edge if bit 15 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of the QEI interrupt if bit 15 in the EDGE register is 0. Detect rising edge if bit 15 in the EDGE register is 1.
TIM14_L	Level detect mode for combined timer output 14 event. 0 (DETECT_LOW_LEVEL): Detect LOW level of GIMA output 27 if bit 16 in the EDGE register is 0. Detect falling edge if bit 16 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL): Detect HIGH level of GIMA output 27 if bit 16 in the EDGE register is 0. Detect rising edge if bit 16 in the EDGE register is 1.
RESERVED	Reserved.
RESET_L	Level detect mode for Reset 0 (DETECT_LOW_LEVEL_IF): Detect LOW level if bit 17 in the EDGE register is 0. Detect falling edge if bit 17 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL_IF): Detect HIGH level if bit 17 in the EDGE register is 0. Detect rising edge if bit 17 in the EDGE register is 1.
BODRESET_L	Level detect mode for BOD Reset 0 (DETECT_LOW_LEVEL_IF): Detect LOW level if bit 20 in the EDGE register is 0. Detect falling edge if bit 20 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL_IF): Detect HIGH level if bit 20 in the EDGE register is 0. Detect rising edge if bit 20 in the EDGE register is 1.
DPDRESET_L	Level detect mode for Deep power-down Reset 0 (DETECT_LOW_LEVEL_IF): Detect LOW level if bit 21 in the EDGE register is 0. Detect falling edge if bit 21 in the EDGE register is 1. 1 (DETECT_HIGH_LEVEL_IF): Detect HIGH level if bit 21 in the EDGE register is 0. Detect rising edge if bit 21 in the EDGE register is 1.
RESERVED	Reserved.

Links

()